nat

Fortigate Virtual IP Port Forwarding Configuration/ Static NAT

On FortiGate devices Static NAT or Port Forwarding is made through the Virtual IP feature.

To map a port on an outside address to a internal ip you need to do two things:

How to setup Asterisk/FreePBX behind NAT

This HOWTO assumes that your FreePBX system is sitting behind a NATed firewall with no direct connection to the outside world and it is NOT in the DMZ zone. If you have your system facing outside, or have used Mapped IP addresses or other techniques, then it is assumed that you have adequate knowledge to interpret these instructions and also assure that you have properly secured your installation.

The three key considerations in setting up remote extensions are:

Subscribe to RSS - nat