remote

Windows Server Remote Desktop Services RDS Upgrade Info

Plan for Deploying Devices using Discrete Device Assignment

How to Run PowerShell Commands on Remote Computers

Remote Restart a Windows Server

Use the Command:

shutdown /r /m \\<Computer Name> /t 0 /c "Comment" /f

How to control and configure services on a Remote server

Remote Control of a Windows Server services is accomplished using a domain computer and vaild domain credentials with appropriate permissions:

 

use the following command(s):

sc \\<Computer Name> query

sc \\<Computer Name> config "[SERVICE NAME]" start= disabled

 

HOWTO Setup A Remote SIP Extension

This HOWTO assumes that your FreePBX system is sitting behind a NATed firewall with no direct connection to the outside world and it is NOT in the DMZ zone. If you are relying on this article to set-up your system, DO NOT place your system on a public IP address or a DMZ zone. This article does not address the potential security implications involved in such a setup.

The four key considerations in setting up remote extensions are:

How to use Group Policy to remotely install software in Windows Server 2008 and in Windows Server 2003

Based on the article KB816102 How to use Group Policy to remotely install software in Windows Server 2008 and in Windows Server 2003 http://support.microsoft.com/kb/816102

 

Enable and configure Windows PowerShell Remoting using Group Policy

Original article can be found here: http://blog.powershell.no/2010/03/04/enable-and-configure-windows-powershell-remoting-using-group-policy/

As you may know, Windows PowerShell 2.0 introduced a new remoting feature, allowing for remote management of computers.

Configure PowerShell Remoting using Group Policy in 2003 Domains

Remotely disable IPv6 with PowerShell

$adminUser = "DOMAIN\USERNAME"
Subscribe to RSS - remote