In my original configuration, I set up a trunk of 3 vlans between my cisco 3750 and HP procurve switches.Vlan 1, 7 and 9 have been working fine. I want to extend it to include vlan 13, so I made the following changes to allow vlan 13 to go through the trunk.Cisco : - switchport trunk allowed vlan 1,7,9,13 (added 13)HP: - vlan 13 tagged 24=============================================interface GigabitEthernet1/0/24 switchport trunk encapsulation dot1q switchpor
VMware ESX, NIC Teaming, and VLAN Trunking with HP ProCurve
In an earlier article about VMware ESX, NIC teaming, and VLAN trunking, I described what the configuration should look like if one were using these features with Cisco switch hardware. It’s been a quite popular post, one I will probably need to update soon.