freepbx

How to configure Asterisk/FreePBX for CounterPath's Bria SoftPhone for Android/iOS or PC

This article is based on tehe original which can be found here: http://www.voip-info.org/wiki/view/Asterisk+Phone+Bria

 

Bria is the newest softphone application from CounterPath, allowing users to enjoy multimedia communications in a dynamic way.

How to setup Asterisk/FreePBX behind NAT

This HOWTO assumes that your FreePBX system is sitting behind a NATed firewall with no direct connection to the outside world and it is NOT in the DMZ zone. If you have your system facing outside, or have used Mapped IP addresses or other techniques, then it is assumed that you have adequate knowledge to interpret these instructions and also assure that you have properly secured your installation.

The three key considerations in setting up remote extensions are:

HOWTO Setup A Remote SIP Extension

This HOWTO assumes that your FreePBX system is sitting behind a NATed firewall with no direct connection to the outside world and it is NOT in the DMZ zone. If you are relying on this article to set-up your system, DO NOT place your system on a public IP address or a DMZ zone. This article does not address the potential security implications involved in such a setup.

The four key considerations in setting up remote extensions are:

Subscribe to RSS - freepbx