manual

How to disable a Drupal module manually

Log on to your server via SSH.
mysql -p

Gets you into mysql.
To see your databases:

show databases;

To pick the drupal database:

use drupal;

Then, substituting the module name for module_name below:

VMWare vCenter Server Appliance Manual Network Configuration

Default Login : root password: vmware

run command: /opt/vmware/share/vami/vami-config-net

This will allow you to manual configure the network settings for the vCenter Virtual Appliance "eth0"

 

 

Manually configuring a Polycom SoundPoint IP 320, 321, 330, 331, 450, 550, 560, 650, 670 and SoundStation IP 6000, 7000

Note 1: This guide has been tested with firmware version 3.3.1 and Bootrom 4.3.0. Be aware that different firmware revisions may have different web interface formats and functionality.

Note 2: This FAQ is based on a new phone OR one that has been reset to factory defaults. If in doubt, reset the phone to Factory Defaults.

The preferred method to configure a Polycom Phone is via Provisioning. You can however follow this guide to manually configure your phone.

Configuring the Phone to Register with 3CX Phone System

Drupal Manual URLs

 

Here is a quick list of Drupal URL's everyone will find useful.

 

Login user form: http://<site name/address>/?q=user

Logout user: http://<site name/address>/?q=user/logout

Note: If ClenaURLs are configured the "?q=" will not appear. (e.g. Login user form would read: http://<site name>/user )

 

Subscribe to RSS - manual