Extreme – Create 2 VLANs and basic configuration
create vlan data
configure vlan data tag 2
configure vlan data ipaddress 10.0.2.1/24
create vlan voice
configure vlan voice tag 3
configure vlan voice ipaddress 10.0.3.1/24
Cisco – Create 2 VLAN interfaces and basic configuration
Remove a PHY NIC from an UpLink in a vDS at the command line:
esxcfg-vswitch --list : Create a listing needed to get the reference for a vmnic's PortID#.
esxcfg-vswitch -V <vmnics PortID#> -Q <vmnic> <NAME of virtual Distributed Switch as it appears in vCenter inventory>
# esxcfg-vswitch -V 577 -Q vmnic1 NET2-N1K-VDS
Delete a Physical NIC from a standard virtual Switch on a Host:
This occurs any time the VSM cannot communicate with the VEM. Are you using L2 or L3 deployment? I resolved a lot of niggly issues once I moved to L3.
Does the VSM see the redundant VSM and all the VEMs as installed modules?
HP Procurve and Cisco Catalyst Interoperability Notes
These are basic notes about interoperabilty on Cisco and HP Switches