Iwatsu ECS to non-Iwatsu IP Phones

I'm getting ready to add a Linksys WIP310 to my ECS 5.01.I'm curious if others have had success with SIP devices.Also, what is the format for proxy address on? Is it {extension}@{ip address of ECS}Do the followings to ECS:Go to: Trunks > SIP Settings > SIP Virtual Trunk Cards and make the following parameterchanges:Enter the Proxy Server and Registrar IP address: This is the LAN IP address of the SIP gateway.Set IP Trunk Registration to: Disable.Set Auth. Registration and Auth. Invite to: Disable.

Setting up X terminal (Xming) to CentOS 5 or CentOS 6 server

Step 1) Add line 1 line in the /etc/gdm/custom.conf file.

You must enable XDCMP in the /etc/gdm/custom.conf file add the following lines:

Enable = true

Step 2) Comment out the "no-listen=tcp" line within the /etc/X11/fs/config file.


Step 3) Restart the xfs service using the command /etc/init.d/xfs restart

Step 4) start "gdm"

Step 5) When prompted by X to allow addition X servers answer "yes"

Step 6) Configure Xming with XDCMP to IP address single window

Step 7) Check Clipboard


Subscribe to kb.kaminskiengineering.com RSS