HP Procurve and Cisco 3750 Configuration Notes

In my original configuration, I set up a trunk of 3 vlans between my cisco 3750 and HP procurve switches.Vlan 1, 7 and 9  have been working fine.  I want to extend it to include vlan 13, so I made the following changes to allow vlan 13 to go through the trunk.Cisco : - switchport trunk allowed vlan 1,7,9,13 (added 13)HP: -  vlan 13  tagged 24=============================================interface GigabitEthernet1/0/24 switchport trunk encapsulation dot1q switchport trunk allowed vlan 1,7,9,13 switchport mode trunk no ip address no mdix auto spanning-tree portfast ============================================Port        Mode         Encapsulation  Status        Native vlanGi1/0/24    on           802.1q         trunking      1Port      Vlans allowed on trunkGi1/0/24    1,7-9,13Port        Vlans allowed and active in management domainGi1/0/24    1,7-9Port        Vlans in spanning tree forwarding state and not prunedGi1/0/23    1,7-9